Shenzhen Megmeet Electrical Co., Ltd

Commercial Display Power Supply

Covering 18-110 inches full size segment; Power range 36-1300W; Multiple protection mechanisms, OVP, OCP, OLP, OSP, etc.; power independent certification, CQC, CB, UL, etc.; Support PWM/DC dimming optional and meet the whole machine certification without strobe. Integrated OPS high-power output, and support for 100W Type-C extended power supply options, the machine can be flexible switching between high and conventional configuration.

Air-cooled industrial microwave power supply

External Adapters

Named after "MANGO", covering 12W-240W, widely used in ultrasound, ventilator, oxygen concentrator, EKG monitor, anesthesia machine and other medical equipments, as well as depilatory instrument, beauty instrument and other medical and aesthetic equipment.

Named after "MP", covering 15W-2000W, widely used in high, medium and low-end(or "all levels of?") medical equipment, can also be applied to ultrasonic knives, dialysis equipment, artificial heart/lung and other precision instruments.

Provides reliable, efficient and safe battery solutions for the medical field. Focuses on safety and sustainability and strives to improve the energy density, cycle life and charging speed of batteries to meet the needs of different medical devices.

PDU Power Supply

Dedicated customization based on customer needs, including power supply design for large medical ultrasound diagnostic systems, with the ability to provide highly customized design of complex power supply systems.

TV Power Supply

LED backlight adopts passive equalization and Local Dimming technology.

OA Power Supply

High/low voltage power supply for MFPs; power range 50-800W; 5V/12V/24V multiple outputs with individual OCP, OVP protection control; comes with over-zero detection, power-down detection, LAMP control, and up to 87% sleep efficiency (0.31W, at 110V/60Hz input); IEC/EN62368-1, UL/CSA62368-1. IEC/EN62368-1, UL/CSA62368-1.

Industrial Automation Series

This series of products are widely used in magnetic encoders on automation equipment, including incremental output and absolute output

Vehicle and Logistics Series

This series of encoders is a cost-effective non-contact magnetic encoder.Bearing free installation, magnetoelectric radial sensing principle, to ensure its flexible structure, size can be customized through the structure

Special Custom Series

This series is a cost-effective split multi-turn absolute magnetic encoder. It is suitable for joint robot, servo drive, AGV, monitoring and other control systems and traditional Angle detection

Construction Machinery Series

The use of non-contact Hall effect technology makes the series extremely robust and reliable, ideal for a variety of applications in harsh environments

MC5000 Series Medium PLC

MC5000 is a perfect combination of motion control and medium PLC

Combined Pump Series

Combined pump series is widely applicable to hydraulic systems with the flexible and convenient combination , sharing the same drive and oil inlet pipeline, which greatly reduces the equipment cost and installation space

AGP (H) series is widely applicable to hydraulic systems and servo-driven energy saving systems. Featuring in high pressure design, ultra-low noise, strong oil pollution tolerance, long service life

New Energy Battery Pack FFC

Break through the traditional pressing process and able to install the built-in fuse device to improve the safety of vehicle battery pack

Can perfectly solve the problems about wire space, time delay and power adjustment, and meet the requirements for high resolution, high chromatic index and fast drive transmission.

With built-in grounding and EMI shielding, multiple wires are combined to meet the requirements for CHARATERISTIC IMPEDANCE(DIFFERENTIAL)=100±10Ω.

Strong flexibility, able to be bent or folded, thin thickness, small size, easy to be connected and disassembled, without electromagnetic shielding (EMI) effect, high frequency.

Magnet flat wires for low-frequency ultra-high-power applications save space and facilitate automated winding.

Litz wires consist of multiple rope like bunched single insulated wires, and there are basic Litz wires, served Litz Wire, Taped Litz wires and other product types used in high-frequency and high-power magnetic components (inductors or transformers).

Square or Rectangular Cross Section Taped Litz Wire

Basic Taped (KAPTON tape) Litz wires can be produced with a square or rectangular cross section by a profiling process, application in high-frequency and high-power magnetic components (transformers).

By continuously innovating product technology, improving service and quality, we have become a leader in the wiring harness industry. The wiring harness adopts high-precision welding technology, making the product highly reliable, stable in signal transmission, cost-effective, small in size, and customizable in different sizes; It is currently widely used in various industries such as laptops, tablets, TVs, advertising machines, security monitoring, drones, and educational system conference machines.

Air Conditioning Controller

This series of products integrates I/O control and data transmission functions, and can realize various air-conditioning control operations such as ventilation, cooling, pre-cooling, heating, pre-heating, and shutdown.

Frequency Converter

This series of products supports a variety of input voltages, can switch loads through software, and meets the needs of synchronous motors and asynchronous motors at the same time, covering most rail transit applications.

This series of products is a high-frequency switching power supply device that converts AC to DC, supports multiple input voltages, and has a wide range of output voltages, and is widely used in the field of rail transit.

DC Power Supply

This series can convert high-voltage electricity into low-voltage 110V\72V\48V for power supply of low-voltage systems. The product has a compact structure and layout, and is widely used in the field of railway transit.

Integrated Frequency Conversion Device

This series of products integrates multiple frequency converters, controllers, and PFCs of different powers to meet the requirements of running multiple loads at the same time.

Fully digital variable frequency high-voltage driver, suitable for use in microwave ovens, ovens, etc., air-cooled design, 100V-120V input, 170W-2000W input power range.

Fully digital variable frequency high-voltage driver, suitable for use in microwave ovens, ovens, etc., air-cooled design, 200V-240V input, 170w-2000w input power range.

Three-in-One Main Control Board

Three-in-one highly integrated solution (integrated control board, power board, heat driver board).

Four-in-One Main Control Board

Four-in-one highly integrated scheme (integrated control board, power board, heat driver board, automatic damping board).

Automatic Damping Plate

This product is mainly used in intelligent toilet. When connected to the main control panel, it can realize the automatic flip function of the whole machine and the intelligent operation of opening the lid when people come and closing it when they leave, enhancing the sense of technology and user experience.

High-precision Instant Heating Module

The thermal module is equipped with a high precision flow meter, dual temperature sensor and dual thermostat.

One-in and Three-out Distribution Valve

One in three out distribution valve, used for hip washing, female washing, self-cleaning three water flow distribution. Solve the distribution of water leakage, motor lost step and other industry pain points.

One-in and Four-out Distribution Valve

For buttock wash, women wash, self-cleaning, stool aid/foam shield four ways of water distribution. Solve the distribution of water leakage, motor lost step and other industry pain points.

One-in and Four-out Distribution Valve (Fine Hole)

For buttock wash, women wash, self-cleaning, stool aid/foam shield four ways of water distribution. Solve the distribution of water leakage, motor lost step and other industry pain points.

Buttock wash, woman wash, help stool three hole water washer. With the MEGMEET distributing valve, it can achieve the first level water efficiency standard for cleaning.

Water Diversion Valve

The industry's first water distribution valve assembly is used for water flow distribution in washing waterways, which solves the pain points of the industry such as water string and easy jam.

AQUARY Series includes models DDA90, DB80, DC70, DY60, E1, E8, K9.

NUERA Series includes models YY3-81、N60、YV50、YV70、YV50T、YX50

HERO series include i7 and i8.

BUTTERFLY Series

The Butterfly series includes models F1U535, F1M535, F1V525

Residential Air Conditioner

Wall-hanging air conditioner controller, cabinet air conditioner controller, window machine and through-wall machine controller, mobile air conditioner controller, dehumidifier controller, ejector air conditioner controller, outdoor air conditioner controller, etc

Commercial Air Conditioner

Unit controller (duct machine, ceiling machine and seat crane), small household multi-link controller, multi-line controller, module controller, etc

Air-Source/Water-Source Heat Pump

Air-source heat pump controller, ground-source heat pump controller, triple supply heat pump controller, pool machine controller, water heater heat pump controller, dryer controller, heater controller, etc

Automotive Air Conditioner

Truck air conditioning controller, RV air conditioning controller, cold-chain vehicle controller, engineering vehicle air conditioning controller, automotive battery thermal management controller, etc

Solar & Other Special Air Conditioner

Solar air conditioning controller, micro compressor controller, base station air conditioning controller, energy storage air conditioning controller, portable air conditioning controller, etc

Microwave Aerogel Curing

Relying on selective heating and rapid heating, the gel is combined with the glass fiber blanket by spraying and dipping glue, after microwave.Fast curing, curing time does not exceed 5min.

Microwave Drying of Glass Fiber

Wemax microwave generator is used for glass fiber drying, which can greatly improve the drying efficiency and quickly remove the moisture inside the glass fiber.

Microwave Chemical Powder Drying

Microwaves can penetrate the inside of an object and heat it at the same time, and molecules rub against each other to generate heat and heat themselves. Can be widely used in chemical.Drying and dewatering of packaging materials for industrial products.

Microwave Honeycomb Ceramic Drying

The drying speed is fast, the ceramic setting can be controlled within 30 minutes,And keep it in good shape.

Microwave Ultraviolet Sterilization Equipment

The virus buster, the bacterial Thanos. By microwave excitation of non-extreme ultraviolet lamp to produce ultraviolet, kill bacteria in the daily environment, suitable for offices, cafeterias, classrooms and other places.

Water-based Paint Drying

Microwave technology is used to replace the traditional drying method to solve the problems of high energy consumption, high pollution, slow production efficiency and inability to dry water-based paint quickly.

The electrodeless UV lamp system is composed of a driving power supply, magnetron, microwave waveguide, lamp, etc., which is used in new energy vehicles, consumer electronics and other fields.

Microwave Generator

Microwave generator by microwave power supply, magnetron, waveguide, cooling fan integrated design, the electric energy into microwave, used in environmental protection, disinfection, glass fiber and other industries.

Meta TIG Series

A full-digital IGBT inverter multifunctional TIG machine has multiple functions such as ACDC TIG, pulse AC/DC TIG, high-speed TIG spot welding, and MMA.

Ehave2 CM Series

An all-in-one welding machine, supports CO2/MAG/MIG/TIG/MMA/Arc Gouging and other processes, and can be extended to robotic welding power sources.

A multifunctional welding machine, the inverter frequency reaches up to 64KHZ, and the high-speed sampling and full-digital control can monitor the phase of droplet transition, acquiring stable and almost no spatter welding.

Artsen Plus Series

Advanced welding machine series combines high-end soft-ware, hard-ware and multiple welding expert database, and multiple processes can efficiently serve in complex welding conditions.

With Three-level main power topology, and the inverter frequency reaches up to 180KHZ. High-frequency control transformer, power density is high, compact dimension with light weight, specially designed for sheet metal welding.

Two-way digital high-speed carrier communication technology is first applied in welding machine and can achieve stable welding for 100 meters long distance, born for ships, marine engineering and other ultra-distance welding.

SMARC IoT Welding Cloud System

Industrial Internet technology and welding technology are deeply integrated to achieve refined data detection, multi-dimensional data analysis, and digital production management.

This series of products uses DSP control technology and the latest switching technology to achieve high-efficiency conversion, with a maximum efficiency of 98%, including AC-DC rectifiers, MPPT (solar) modules, wind energy modules, DC-AC inverters, DC-DC Modules and other products

Three-Phase Power Supply

Three-Phase Power Supply

Single-Phase Power Supply

EV Compressor Series

此系列产品主要应用在新能源电车领域，适用BEV、HEV、PHEV、REEV车型，采用多模块、轻量化技术，使乘客在车内控温时拥有静谧舒适体验。

Auto Thermal Management System

基于R744 （CO2）制冷剂的热泵型热管理系统, 在-25℃~45℃环境下均能高效工作，大幅提升电动车冬季续航里程。

New Energy Vehicle Series

This series is suitable for BEV, HEV, PHEV, REEV models, which adopts multi-module and lightweight technology, so that passengers can have a quiet and comfortable experience when controlling the temperature in the car

New Energy Railway Transit and New Energy Bus Air-conditioner Series

Compatible with a variety of environmental protection refrigerant, using a variety of high protection design, oil control lubrication, shock absorption and noise reduction technology, so that the car air conditioning operation quiet and reliable, to ensure comfortable ride

Commercial Refrigeration and Heat Pump Series

Compatible with a variety of refrigerants, the compressor adopts a variety of oil control and temperature control technologies to make the man and machine harmonious, and the equipment is stable and durable

Meet the three unified standardized external dimensions of the National Grid, 250-1000V ultra-wide constant power range output, high power density, high reliability, modular design, and perfect air duct design.

Low-voltage 20KW charging module, 20-120V ultra-wide output voltage range, fully meets the charging needs of lead-acid batteries and lithium batteries, and is widely used in various industrial fields.

Intelligent Display

Focusing on the Large Screen Display Field.

Railway Air Conditioning and Energy Storage Series

This series of products is mainly used in the field of railway air conditioning and energy storage. It is compatible with a variety of refrigerants. The compressor integrates a variety of noise reduction and life extension technologies to make the train air conditioner quiet and reliable, and the energy storage is stable and efficient.

Brushless electronic water pump with unique structural design and autonomous algorithm.

Half Range Input Series

The input voltage:100-240VAC, adopt stable and reliable power electronic technology conversion scheme, high power density, high reliability. It is a new generation of cost-effective products.

Full Range Input Series

The input voltage: 100-240vAC, using the most advanced technology in industry which is the soft switching conversion scheme, built-in Active Power Factor Correction (APFC) function.

Ultra-thin Series

This series of products is the new generation of ultra-thin power products for Megmeet. Mainly applied to indoor small-pitch color screens, it is small in size and thin in thickness, which can reduce the thickness and quality of the display screen.

Dual Outputs Series

Dual Output Power Supplies separate supply for the three primary colors of the new generation display electricity, reduce the loss of lamp beads of the screen, high power density, small size, high reliability and high loading capacity.

N+1 Redundant Current Sharing Series

This series of products supplies power to the display through N+1 mode. The current sharing backup has high reliability and strong loading capacity, which can effectively improve the stability of the display.

This series product can adapt to the mainstream light source in the market, position the needs of high-end laser ultra-short throw TV, and have the characteristics of small size, ultra-thin, low power consumption and high efficiency.

Laser Engineering Education Projection

This series product can adapt to the mainstream light source in the market; Support multi-module parallel communication, and flexible combination; DC output and constant current laser drive two-in-one; Meet multiple outputs.

Smart Micro-Projection

Adapt to the mainstream LED and laser light sources in the market, as well as DLP and single LCD projection technology, it can provide a single power supply or a two-in-one solution of power supply and constant current drive.

Laser Cinema Projection

It can be customized according to the laser light source, and adapt to high power, multiple outputs (4/8/16), support multi-module parallel communication, and can be flexibly combined.

35 W / 50 W Series

1. Input: 85 to 264 VAC / 120 to 370 VDC 2. High efficiency, high reliability, small size 3. Over voltage category III

Fully digital variable frequency high-voltage driver, suitable for use in microwave ovens, ovens, etc., air-cooled design, 100V-120V input, 150w-1500w input power range.

Fully digital variable frequency high-voltage driver, suitable for use in microwave ovens, ovens, etc., air-cooled design, 200V-240V input, 335w-1340w input power range.

Fully digital variable frequency high-voltage driver, suitable for use in microwave ovens, ovens, etc., air-cooled design, 200V-240V input, 355w-1500w input power range.

Fully digital variable frequency high-voltage driver, suitable for use in microwave ovens, ovens, etc., air-cooled design, 200V-240V input, 335w-1340w input power range.

Refrigerator Controller

Providing one stop solution for refrigerator drive and control; With high performance, high quality, high reliability and other technical advantages to lead the market, our products are now widely used in refrigerators, freezers, medical refrigerators and other fields

Freezer Controller

Applied to freezer, with wide voltage range and reliable quality

Wave-Wheel Washing Machine Controller

Rich laundry program, intelligent washing, high-efficiency and energy-saving, flexible customized design

Drum Washing Machine Controller

Rich laundry program, intelligent washing, high-efficiency and energy-saving, flexible customized design

Light Electric Vehicle

Heat Pump Dryer Controller

With vector frequency conversion control technology, our controller is energy-saving and high-efficient to dry clothes faster

Intelligent Oil Production System of Electric Submersible Progressing Cavity Pumping (ESPCP)_copy

Efficient and energy-saving, green and environmentally friendly, safe and reliable, and intelligent management

Under the tide of industry 4.0, a complete set of remote information system has become necessary for equipment manufacturers and production plants. The Internet solution of industrial equipment devised by MEGMEET for customers achieves the remote interconnection of a large number of devices through the latest industrial interconnection technology, providing customers with efficient and stable data transmission, accurate and timely data analysis, implementation of alarm push and query, inquiry for equipment historical data, management of after-sales maintenance information, PLC remote up-download program and monitoring, to help customers enter the era of industrial Internet cloud.

300W-600W Bi-directional Inverter

Applicable to portable power stations and solar generators, output power adjustable from 300W to 600W, built-in 200W MPPT, EMC Class B passed, original topology, high power density, OTA supported

1000-1200W Bi-directional Inverter

Applicable to portable power stations and solar generators, output power adjustable from 1000W to 1200W, built-in 400W MPPT, EMC Class B passed, original topology, high power density, OTA supported

1800-2200W Bi-directional Inverter

Applicable to portable power stations and solar generators, output power adjustable from 1800W to 2200W, built-in 800W MPPT, EMC Class B passed, original topology, high power density, OTA supported

1800-2400W Bi-directional Inverter

Applicable to portable power stations and solar generators, output power adjustable from 1800W to 2400W, built-in 800W MPPT, EMC Class B passed, original topology, high power density, OTA supported

3600W Bi-directional Inverter

Applicable to portable power stations and solar generators, 3600W output power, built-in 1600W MPPT, EMC Class B passed, original topology, high power density, OTA supported

Megmeet's potted series power supplies are designed to meet specific usage scenarios of LED displays, providing protection against common salt spray environments, and achieving up to IP67 level waterproofing. This ensures that the displays receive a stable power supply even in harsh conditions for extended periods.

MC6000 Series Medium PLC

MC6000 series PLC is a new generation of bus-type medium PLC based on the Codesys platform.

The external semi-disposable filter can effectively filter out microorganisms such as sediment and nematodes in tap water, making the cleaning water fresh and clean. It can alleviate scale blockage of the product and be used normally in low-temperature environments.

L6 Low-Voltage Electric Drive Series

L6 series applications such as forklift trucks, tractors, aerial work trucks, stirring trucks, lifting platforms, etc., are widely used in logistics, sightseeing, construction machinery, and other scenes.

Energy Storage Thermal Management Series

Suitable for R410A, R134a, R290 refrigerant, covering 10~45kW unit cooling capacity, with frequency conversion drive technology, to ensure the battery thermal management system temperature control stability, energy storage safety and reliability.

C&l BESS (Liquid Cooling)

lntelligent control, high security, flexible application, flexible expansion, quickly put into operation, high adaptability

Energy Storage Combiner Cabinet

Modular design, safety & intelligent control, intelligent cloud connection

C&l BESS (Air Cooling)

lntelligent control, high security, flexible application, flexible expansion, quickly put into operation, high adaptability

Battery PACK for BESS (Air Cooling)

CCS integrated design, integrated panel design, high compatibility, multiple cooling design

Battery PACK for BESS (Liquid Cooling)

CCS integrated design, high compatibility, active balancing, high security, high security

Flexibility on grid, multiple level protection, parallel connection and modular design, new modulation technique

High Voltage Box

High compatibility, smart control, battery cluster pre-charge function, modular design

BMS (First Level Control)

Battery pack management (52S); C&l ESS and Container ESS

BMS (Second Level Control)

Battery cluster management, 1500V voltage battery system; C&l ESS and Container ESS

BMS (Third Level Control)

BESS management; Third Lever Control for C&l ESS and Container ESS Linkage control with PCS and EMS

Large size, high power, stringent standards

PV & ESS Overall System OEM

High-power power module, photovoltaic inverter/energy storage converter, wind power converter/energy storage system parts

Communication BMS

Applied in communication base station, home energy storage, energy storage backup ionization network and other systems

Battery management for portable power supplies

EMS Cloud Platform

It can access photovoltaic, energy storage, charging pile related equipment, and the system architecture level is clear

Battery management of engineering vehicle parking power system

Roller vehicle power system battery management

Intelligent Lithium Communication Battery Pack

Two-way DCDC, mass expansion, balanced function, intelligent design, simple operation and maintenance

Split Type Super Charging Station

Liquid cooling supercharging, flexible allocation, intelligent operation & maintenance, safe & efficient

Safe and stable, intelligent and convenient, high integration, intelligent operation and maintenance

1MW 800VDC Power Rack

800 VDC output, reducing conversion stages, lowering power consumption, and decreasing system PUE, supporting green and sustainable development of data centers

M3 Basic Servo System

High response, high bandwidth, high precision and high overload capacity; optimized motors

MC8000 Series Medium PLC

MC8000 series product is a new generation of high-performance and cost-effective medium PLC based on the mOPAX platform of MEGMEET.

MX600 Series Medium PLC

MX600 series medium-large PLC is developed based on the X86 hardware structure, conforming to the PLCopen specification and IEC61131-3 standard.

Smile1000 Integrated Elevator Controller

Advanced drive control, robust safety, and customer-oriented features

Fully-featured compact low-power AC drive

Super Fast Charging Stations SFC240

Fast charging, safe & efficient, intelligent operation & maintenance, flexible efficient

MIPC 1000-100 Series

A mainstream 30kW high-voltage (150~1000V) fast charging module delivering 100A max with 96.5% efficiency. Features -40°C cold start, ideal for public 800V platform EV superchargers.

A globally compatible 20kW module with an ultra-wide input (187~528VAC), built-in output relay, 60-unit CAN paralleling, and THD <= 3% for international low-voltage fast charging networks.

Upgraded 20kW module with an expanded 20~200V DC output, optimized for mid-voltage lithium-ion industrial vehicles and compact energy storage units with efficient, intelligent air cooling.

Export-focused 30 Kilowatt fast charging module with universal three-phase three-wire/three-phase four-wire alternating current input, zero standby power, 127-unit controller area network paralleling, and Conformite Europeenne-compliant insulation for global Combined Charging System and GB/T networks.

High-power 40 Kilowatt module delivering 50~1000 Volt / 135 Amperes with greater than or equal to 96.5% efficiency. Supports multi-rate controller area network communication and 60-unit paralleling for heavy-duty truck battery-swapping and supercharging stations.

Overseas 40 Kilowatt module featuring an ultra-wide input (260~530 Volt alternating current) to withstand grid fluctuations. Features Class A electromagnetic compatibility and Underwriters Laboratories/Conformite Europeenne certifications, optimized for Middle East and Southeast Asian markets.

An isolated 40 Kilowatt direct current to direct current module (250~950 Volt direct current input) with 97% peak efficiency, low-noise full potting, and Underwriters Laboratories/Conformite Europeenne certifications for integrated solar-storage-charging infrastructure.

A 40 Kilowatt single-stage bidirectional vehicle-to-grid module (20 Kilowatt charge / 40 Kilowatt discharge) with 98.8% efficiency, full potting, and a 1-million-hour mean time between failures for advanced vehicle-to-grid energy storage systems.

Flagship 66.7 Kilowatt high-power module (200~1000 Volt / 111 Amperes) featuring greater than or equal to 97% efficiency, 127-unit controller area network paralleling, and fault lockout protection, engineered for 800 Volt heavy truck and bus supercharging.

A 25 Kilowatt energy-storage side direct current to direct current module (700 Volt direct current rated input) with 96.3% peak efficiency, minus 40 degrees Celsius cold start, and 31-unit controller area network paralleling for integrated photovoltaic-direct current fast chargers.

Single Motor Control Unit

此系列产品包含多个功率段的电机控制器，支持主动阻尼、谐波注入、PWM波混合调制、载频平滑切换与抖频控制等功能。

Smile3000 Integrated Elevator Controller

Excellent drive control, customer-facing features, and robust safety

Based on ARMCortex-A8 CPU, 256M flash, 512M SRAM and Linux operating systems, Megmeet’s telecom power controller provides a more powerful, user-friendly and easy-to-use interface to monitor and manage different power modules, diesel engines and batteries

Adopts a new core hardware platform, and optimizes algorithms for motor control, realizing the integrated drive of asynchronous and PM synchronous motors, and integrated control of speed and torque

Dual Motor Control Unit

此系列是专为混合动力车型打造的双电机控制器，采用稳定先进的控制算法，具有低功耗、高可靠性、高功率密度的特性。

Multiplexed Motor Control Unit

此系列产品集成了电机驱动器、电源单元、高压配电模块，内部设计高度集成，系统结构简单，有利于整车布置和装配。

M5 Servo System

High response, high bandwidth, high precision and high overload capacity; optimized motors, fit for mainstream encoders, and fully closed-loop control

MC5000S Remote I/O Module

MC5000S series product is a new generation of adapter developed by MEGMEET, which adopts the modular and industrial design concept.

H6 Medium-Voltage and High-Voltage Electric Drive Series

H6 series applications such as: stirring trucks, tractors, loaders, loading systems, etc., widely used in heavy construction machinery, loading and heavy loads and other scenarios.

33 kW Power Shelf

The IPU433-AI616 is a compact, high-capacity power system engineered to support the demanding power requirements of AI servers and the Open Compute ecosystem. It features a centralized modular power shelf architecture that delivers power to connected devices via a shared bus structure. For racks with higher power demands, multiple power shelves can be deployed in parallel to scale capacity efficiently.

MR400 Remote I/O Module

MR400 series remote I / O module is a new generation of adapters launched by MEGMEET.

75 W / 100 W Series

1. Input: 85 to 264 VAC / 120 to 370 VDC 2. High efficiency, high reliability, small size 3. Over voltage category III

EV DCDC Converter

此系列产品应用于新能源乘用车、商用车、电动摩托车，可将车内的动力电池高压电转换为低压12V用于整车低压系统供电。

Water cooled industrial microwave power supply

Embedded Subrack

The power supply system adopts a modular design and is compatible with application scenarios such as outdoor base station cabinets and outdoor computer rooms, forming an integrated indoor and outdoor DC power supply system to meet the different needs of customers

MU200 Series Small PLC

Excellent performance for widespread application; Multiple communications facilitate networking; Flexible expansion with stability and reliability; Simplified programming from upgrading of functions

M6 Servo System

High responsiveness, high bandwidth, high precision and high overload capacity; a wide range of motors, integrated encoder interfaces, and fully closed-loop control

Multiplexed EV Charging System

此系列产品为OBC&DCDC集成充电产品，涵盖多个功率段需求，结构紧凑，广泛应用于新能源乘用车、商用车、电动摩托车领域。

Optimizes algorithms for motor control, realizing the integrated drive of asynchronous and PM synchronous motors, and integrated control of speed and torque

Cooled industrial microwave power supply

Smile3000-M Integrated Elevator Control Cabinet

Highly integrated, safe and quiet, with delicate appearance

OBC (On-Board Charger) Series

With the characteristics of high efficiency, safety and reliability, intelligence, integration, etc., it is widely used in electric forklifts, electric tractors, electric storage vehicles, electric sanitation vehicles and other scenes.

MU300 Series Small PLC

The MU300 series product is a new bus-type small PLC.

BBU Shelf -- 16.5 kW Battery Backup System

The BBU Shelf is engineered to deliver dependable backup power, ensuring uninterrupted operation of servers and essential equipment during main power failures or short-term outages effectively preventing data loss and minimizing system downtime.

MU400 Series Small PLC

MU400 is a new generation of economical PLC based on mOPAX platform.

MC280/MC200E Series Small PLC

Adopt ARM+FPGA dual-core processor to improve operation speed and performance, especially highlighting in pulse and count input-output performance

MC200 Series Small PLC

MC200 series is a programmable logic controller with high stability, high reliability, fast instruction processing speed, large program capacity and ultra-wide voltage range

MC160X Series Small PLC

MC160 series is an economical, highly reliable, and highly integrated programmable logic controller

MCCD Series All-in-One Controller

MCCD series is a controller integrated with PLC and touch screen

MC100 Series Small PLC

MC100 series programmable logic controller has the characteristics of small size, large capacity, high configuration and high speed

Adopts a new hardware platform, integrates V/F control, and provides excellent drive

Used in conjunction with a 3KW magnetron, coupled with a water-cooled microwave magnetron system, provides overall stability

Power Distribution Unit (PDU)

PDU is a telecom site power supply system-48VDC output intelligent power distribution unit. It supports single-channel output power and remote breaking control

Smile3000-V Integrated Control Cabinet for Home Elevators

Highly integrated, safe and quiet, with delicate appearance

DCDC Power Converter Series

In the engineering vehicle industry, it has the advantages of high efficiency, high power density, high reliability, easy control and easy maintenance.

DM5 Low-Voltage Servo System

Multiple control modes, command channels and communication protocols, compatible with different kinds of motors, flexible for installation

15 kW Super Power Capacitor Shelf

MEGMEET's high-power series power supply products are designed to meet the rigorous demands of modern data environments, fully compliant with network communication protocols such as EDPP. In addition to standalone power modules, MEGMEET offers turnkey PSU shelf solutions, battery backup units (BBU), and power capacitor systems tailored for AI server racks.

1. Input: 85 to 264 VAC / 120 to 370 VDC 2. High efficiency, high reliability, small size 3. Over voltage category III

High-power industrial microwave power supply

MTCW Series Thermostat

Integrated multi-channel temperature control replaces the temperature-controlled meter for centralizing data management conveniently

MTCV Series Thermostat

Integrated multi-channel temperature control replaces the temperature-controlled meter for centralizing data management conveniently

MTC Series Thermostat

Integrated multi-channel temperature control replaces the temperature-controlled meter for centralizing data management conveniently

Mini-type drive. Adopts a new hardware platform, integrates V/F and SVC control, and provides excellent drive

210 W / 350 W Series

1. Input: 90 to 132 VAC / 180 to 264 VAC 2. High efficiency, high reliability, small size 3. Over voltage category III.

MV820E Elevator AC Drive

Safe, intelligent and self-adaptive

MTCE Series Thermostat

MTCE series thermostat is a new generation bus-type temperature control product independently developed by MEGMEET.

MDT Series Thermostat

MDT series thermostat is a new multi-channel high-precision temperature control product launched by MEGMEET.

Lithium Battery Pack

The Lithium Battery Pack is a 19-inch integrated lithium iron phosphate telecommunication backup battery pack, with a height of 3U. The product has the characteristics of small size and energy saving.

M6-L Direct Drive Servo System

High response, high overload, high bandwidth, multiple kinds of motors, integrated encoder interface

MQT Series Thermostat

MQT series product is a new generation of cascade temperature controller.

ATS - Automatic Transfer Switch

MEGMEET's high-power series power supply products are designed to meet the rigorous demands of modern data environments, fully compliant with network communication protocols such as EDPP. In addition to standalone power modules, MEGMEET offers turnkey PSU shelf solutions, battery backup units (BBU), and power capacitor systems tailored for AI server racks.

MC5500HOR54WL00

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

MZ600 Series HMI

Easy learning and use, intuitive programming, multilingual operation interface

MZ800 Series HMI

Comprehensive configuration upgrade; A set of Web-based engineering with multi-terminal access; Object-oriented programming; Rapid complex engineering development; Statistical analysis

Smart, simple, clear, high power density and strong compatibility

Optimizes V/F control to achieve high performance, large torque and wide speed regulation, and operates with reliable anti-tripping to ensure stable operation in harsh environments with bad power mains or filled with dust

High-power industrial microwave power supply

Megmeet's indoor cabinet integrates AC input, rectifier, DC, and power distribution. The product is compatible with 220VAC and 380VAC, supports stacked optical input, and has a maximum capacity of 3000A.

HM6 High-Power Servo System

High response, bandwidth, accuracy and overload; integrated encoder interface and fully closed-loop control

1. Input: 85 to 305 VAC 2. High efficiency, high reliability, small size 3. Active PFC

MM4500AOR54WS00

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

Outdoor Cabinet

Megmeet's outdoor cabinet integrates the power cabinet, temperature control, battery, power distribution and environmental detection, combined with background remote communication control. It provides users with a safe and reliable communication site power supply

MC6000 TC Tracking Controller

MC6000 TC Series is an embedded controller developed specifically by MEGMEET for vision system and applications. It can realize high-speed object tracking for vision system, triggering industrial cameras, and accurately activing the rejection device. The controller can be expanded if more cameras are necessary.The controller is free configurable without difficult programming.

MC5000-C4 Expansion Module

MC5000-C4 is an expansion module specially designed for tracking controllers. More camera triggers can be connected, and one expansion module can control 4 cameras and light sources at the same time.

MEG-SLIM4000W54WAIT

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

1. Input: 90 to 132 VAC / 180 to 264 VAC 2. High efficiency, high reliability, small size 3. Over voltage category III

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

GP, vector control AC drive. Adopts advanced V/F and open-loop vector control methods to unify torque control and speed control of asynchronous motors

Axial Torque Motor

It is mainly used in high-precision rotary positioning stage systems, with four models including 120/155/200/280 mm in size, which integrates bearings and encoders to reduce the size of the motor and meet the needs of different environments

2000 W Enclosed Power Supply

1. Input: 85 to 290 VAC 2. Active PFC 3. Full protection function: OCP / OVP / SCP 4. Active current sharing up to 14 kW (7+1)

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

Smile100(A) Door Operator Controller

High aesthetics, high integration, ultra-thin, small size, easy installation, and rich functionality

Adopts DSP + FPGA, fast and stable in operation; develops leading integrated motor control algorithms to drive asynchronous, synchronous and linear motors; uses closed-loop vector algorithms, achieving great dynamics and precision; and also supports various PG and bus expansions

Iron Core Series Linear Motor

It is mainly used in situations of high continuous and peak force, high speed, high rigidity, and high response. It has broad application prospects in fields such as laser cutting and packaging. The continuous force of motor ranges from 24N to 6368N

3000 W Enclosed Power Supply

1. Input: 85 to 290 VAC 2. Active PFC 3. Full protection function: OCP / OVP / SCP 4. Active current sharing up to 14 W (7+1)

High power: 3300 W, hot swap, 80PLUS Titanium

Ironless Series Linear Motor

It has 3 categories and 15 specifications, covering various demand scenarios with continuous force ranging from 26 N to 722 N. It is suitable for situations with fast response speed, high accuracy requirements, and smooth operation

Configurable Power Supplies

1. Input: 170 to 264 VAC 2. Dual output 3. Over voltage category III

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

SPA Open-Loop Spindle Drive

Large inertia mechanical spindles, small inertia high-speed motorized spindles; and large torque on low frequency

Frameless Torque Motor

High torque structure design, customizable, low cogging torque, smooth operation, low harmonic distortion rate, customizable for various winding modes, suitable for various medium, high, and low speed situations

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

SPS Series Spindle Servo Drive

Quick dynamic response, high locating accuracy and strong overload capacity

It adopts modular design, simple installation, flexible configuration, and meets diverse choices; Long stroke structure can be infinitely spliced, suitable for 3C, electronic assembly testing, LCD panel production, medical equipment and other industries

IPS122400 Series

MEGMEET's Slim series are moinly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 inteligentcommunication protocol, They have the ability to be easily managed and respond dynamically, ensuring the efficientoperation of the equipment.

S6 New-Generation Spindle Servo Drive

Quick dynamic response; high locating accuracy; strong overload capacity; inertia tuning, rigidity table and fully closed-loop control

Linear Stage Series

Single-axis/multi-axis high-precision positioning linear platform, high-performance low-cost solution, robust mechanical structure, flexible configuration options (different travel and feedback) dynamic performance. It has better geometric properties and a higher load carrying capacity

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

Mcp Series Controller

Injection Molding Machine Controller

It is mainly used in the medical and semiconductor industries, with advantages such as small size, good heat dissipation performance, and convenient assembly; There are four series options available, with continuous force ranging from 7N to 143N; Can meet different customization needs

MEG-CRPS2200AOP

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

GK Series Panel

Injection molding machine vertical screen series panel

Lifting Stage Series

The vertical motion Z-platform with nanoscale positioning accuracy has excellent dynamic performance and positioning accuracy. High-reliability drive mechanism for longer service life. Larger trips can be customized.

MEG-CRPS1600AOP

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

MV600J6/J6B Electro-Hydraulic Servo Drive

Quick dynamic response; high precision on pressure control; strong overload capacity; oil pressure loop, multi-pump convergent/distributed flow, drive and motor kit; efficient, energy-saving, stable and durable

Voice Coil Motor

It is mainly used in the field of mini LED and micro LED semiconductor encapsulation. The optical lens quickly focuses on high-frequency reciprocating motion, with a maximum frequency of 10 k/h and a maximum acceleration of 30g

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

MV810J Electro-Hydraulic Servo Drive

Quick dynamic response; high precision on pressure control; high overload capacity; oil pressure loop, multi-pump convergent/distributed flow, drive and motor kit; efficient, energy-saving, stable and durable; and liquid-cooled with small size

MEG-CRPS1300AOP

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

Hydraulic Servo Motor

Permanent magnet embedded , field weakening overspeed, anti-demagnetization, high energy efficiency and slow temperature rise; EBM fans as standard; PTC and KTY temperature sensors; and advanced motor design platform

Gantry Stage Series

High rigidity, low friction. High positioning accuracy, suitable for the occasion of high precision requirements. Simple structure, extensible, customizable. Gantry platform, with marble as the base, equipped with precision rail, equipped with precision grating, so that it can achieve high precision and high requirements.

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

IPS121200 Series

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

IPS121100 Series

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

Air Bearing Stage Series

High performance direct-drive air bearing stage series has high dynamic performance and nanoscale positioning accuracy. Through the linear motor drive, combined with the pressure design, it effectively deal with the gravity of large-volume load on the air bearing lead rail, ensuring the air gap between the guide rail.

IPS56850 Series

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

MEGMEET’s CRPS and M-CRPS™ Series represent the industry’s most common and cost-effective power solutions for networking infrastructure. Engineered for high performance, these modular, hot-swappable units deliver exceptional power efficiency and density ideal for space-constrained environments.

MV600L AC Drive for Cranes

Dedicated for the lifting industry, such as gantry cranes, bridge cranes and tower cranes. Integration of lifting, slewing and luffing mechanisms algorithms

IPS12650 Series

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

IPS12450 Series

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

MV800L AC Drive for Cranes

Dedicated for the lifting industry, such as gantry cranes, bridge cranes and tower cranes. Integration of lifting, slewing and luffing mechanisms algorithms. New-generation products.

MV600Tr Drive for Tunnel Locomotives

Tunnel locomotives' main drive, with automotive-level structure and safety, well adapted to high-temperature, high-humidity, high-vibration and poorly ventilated tunnels

IPS12400 Series

MEGMEET's Slim series are mainly used for devices such as switches and servers. They provide stable power support.The Slim series power supplies are tailor-made for high-density deployments and support the PMBus 1.2 intelligent communication protocol. They have the ability to be easily managed and respond dynamically, ensuring the efficient operation of the equipment.

MHP260 HVAC Drive

HVAC drive, built-in SVC control algorithms for DC/synchronous compressors bringing stability, efficiency and energy conservation, and communication control

MHP280 New-Generation HVAC Drive

Built-in DC/synchronous compressor SVC control algorithms, communication channels, energy efficiency, high performance and stability

MV810 820A Series AC Drive for Air Compressors

AC drive for air compressors, integrated with special logical control signals for air compressors, phase sequence detection of power supply and phase loss protection

MV810 820 (SP2) AC Drive for Solar Pumps

MV810 820 (SP2) Series AC Drive for Solar Pumps, which takes different applications of solar pumps into consideration based on Megmeet’s new-generation general purpose vector platform MV800, can convert DC of photovoltaic array to AC power and drive pumps to run in high efficiency for water supply in remote regions where power facilities are scarce.